Split a Body Now Need to Combine Them Again
The dissever characteristic is an extremely useful tool when designing using multi body part techniques in SOLIDWORKS. Let'due south look at how the tool functions and what we tin do with the bodies once they accept been split.
In the below epitome we have selected the front end plane to cutting the part which has resulted in splitting the part in to 2 bodies (equally shown in the 'Resulting Bodies' box).
If you would like to keep either of those bodies, you must bank check them in the 'Resulting Bodies' listing.
If you would like to consign those bodies to their own individual role files, double click the text box (that currently says '<none>') adjacent to the cheque box. This will bring up a 'Salve as' dialogue, where y'all can choose the name and destination of the saved trunk.
The 'Consume cut bodies' check box removes the checked bodies from the current (original) model. The derived part files will still be created as before.
In this example we have decided to proceed both of the bodies, salve them out as the file proper name 'Body1' & 'Body2'. By unchecking 'Consume cut bodies'. These bodies will however be bachelor in our original model.
This has left us with three files – the original part file and 2 derived part files as per the images below:
Once the split feature has completed, it will show in the tree of the original model. Any features that you utilise to the original model before the carve up characteristic volition automatically propagate to the derived parts. Whatsoever features that come up afterwards the split feature exist only in the original model.
In the above example the fillet was created before the divide feature and therefore propagated to the derived part. If we were to drag the fillet feature below split, this would non happen.
The only way to know that the bodies have been saved out is to await in the divide feature and meet if at that place is an entry in the file box of the split bodies command.
If you decide non to save your bodies during the split operation (e.one thousand. to do some additional piece of work on the body subsequently its split earlier exporting it), yous can do it a later bespeak in your pattern using the 'Save bodies' command. This will allow you to selectively choose which bodies you wish to save. A 'Salvage Bodies' feature will be created in the tree and any feature applied to a body before the 'Save Bodies' characteristic will exist propagated to the derived office, similar to the split feature.
'Relieve Bodies' lets you know that bodies have been saved, because at that place will exist a Saved bodies feature in the tree, but the only manner to know which bodies have been saved is to look in the feature.
'Salvage Bodies' as well gives you lot the power to create an associates from the saved bodies. This option creates a new associates and places the derived parts into the assembly fixed to the origin – and then their positions are correct relative to each other. In this example nosotros will save the ii bodies as an assembly.
As y'all tin can see from the images below we now accept 4 files created. The original part, the 2 derived part files containing the individual bodies and the assembly file.
If you lot determine to create an assembly, you will need to exist aware what happens, if in the original part you brand a change above the save bodies to affect the corporeality of solid bodies.
In this example we will add another cut airplane (right plane) to our split control:
This splits the model in to 4 carve up bodies and brings up the message 'Allow SOLIDWORKS to attempt to assign split bodies to existing files'.
SOLIDWORKS is basically trying to pick ii bodies from the iv created and requite them the aforementioned torso i.d as the original ii so all child features that were related to the original 2 go related to the two it chooses. We will likewise tick to keep the other ii bodies to go on all 4 bodies.
This leaves us with the result shown here:
As y'all tin can see the 'Salve Bodies' command uses the re assigned bodies for the assembly.
If nosotros desire to salvage the remaining ii bodies as parts and import them into the assembly, we need to modify the 'Save Bodies' control to include the other 2 bodies. This will create the 2 parts simply it volition not automatically add them to the assembly. This has to be done manually.
We hope you found that useful!
Have y'all seen our blog archive where we take posted plenty of helpful articles? Nosotros also have a fantastic video library filled with easy-to-follow videos on a number of topics inspired by other SOLIDWORKS users – take a await.
Also, don't forget to follow us on twitter for daily bite size SOLIDWORKS tips, tricks and videos.
Source: https://www.innova-systems.co.uk/use-split-feature-solidworks/
0 Response to "Split a Body Now Need to Combine Them Again"
Post a Comment